Up-Close and Personal with Merida (Brave)

Seeing as how EVERYONE AND THEIR MOTHER wants to be Merida for Halloween this year (which I think is totally the greatest thing ever btw), I wanted to toss out an up-close look at how I made my Merida costume.  As always, feel free to comment, email or tweet me any questions on the process.

Also, check out my Etsy listing for your own custom Merida costume including under dress, over dress, belt and free goodies! (I also offer special orders for the full dress and wig set)

I'm going to start this breakdown with a bit of a rant.  Anyone who follows me on Twitter or knows me personally has heard this already, but I want to reiterate it for those of you who have not yet made the mistake:

MERIDA'S ARCHERY DRESS IS NAVY BLUE NOT GREEN

I apologize if it comes off harsh, but there are a frightening number of people out there who are still convinced that her archery/lounge dress is green and it most definitely is not.

To those who may wish to argue this with me, here's how I know it's blue:

1)  Observe the following still from the film:

that sure looks like blue to me, you?

2)  Observe the following character doll approved and released by Disney:

I'm pretty sure Disney's been doing this long enough to not release a doll with the wrong color dress...

3)  At the Comic-Con 2012 Brave panel, an audience member asked the panel of creators what color Merida's archery dress is.  Their answer?  Navy Blue.

I will acknowledge to a slight green tint in a few photos, but her dress is most definitely NOT forest green like it is being depicted by so many cosplayers.  PLEASE, COSPLAYERS, DO YOUR RESEARCH!!!!

</rant>

Now that that's out of my system, on to the breakdown:

I started with the under dress.  I've seen a number of people create Merida's dress as one solid piece, which doesn't look terrible, but I like to strive for accuracy and since you can see that she has 2 separate layers on in many shots, I decided to do it a little different.

For the "bodice" part of the dress, I used the Under Dress A pattern from Simplicity 2573:

BUT, I replaced the sleeves of the dress with the B/C/D sleeves from Butterick B5008:

Merida's under dress has ruffles on the sleeve cuffs and neckline

I sewed the dress as instructed minus the neckline ruffles.  Then I sewed the sleeves with two alterations: I closed the wrist cuff so it made a small tube, leaving a space open for elastic and I folded the ruffles in half because the pattern calls for them to be too long.

Next I added the sleeves to the dress.  Once everything was lined up, I cut the sleeves to fit the shape of the dress and added the neckline ruffles and elastic:

Once that was complete, I moved on to the over dress.  For this, I used Butterick B4827:

For this part, I started by basically just following the pattern, except I left the sleeves off and closed up the sleeve edges:

I also added a little block to the middle of the upper edge lining in preparation for the opening later.

For the sleeves, I sewed them together so they fit and then lined out where I wanted to cut them.  I cut both sleeves into two pieces and used the sections I had cut out to make the little straps between the sleeve sections.

I attached those to the sleeve opening on the dress and cut the opening in the front:

In the film, Merida has lacing holding the opening in the front closed, so I poked a few holes and strung a little extra leather lacing through:

The belt was very easy.  I used the belt pattern included in Butterick B4827 with a brown faux leather.  Once the belt was sewed and clasps attached, I overstitched the edges with about 5 strands of a very dark brown thread to create the look from the movie.

The final step was to style my wig.  For my costume, I curled a straight orange wig I bought off eBay.  Stay tuned for that tutorial.

For shoes, I purchased a pair of brown leather flats from Payless and wore a pair of white stockings.  In some images, Merida's shoes look like flats and in others they look like boots, but they are definitely brown leather and she wears white stockings under her dress.

Hope y'all find this helpful!  Feel free to ask questions or send me pics of your version! :)

CosPlay with me
-Angi

My Yuna on FFX-2 Cosplay Site

When I posted my Yuna cosplay, I came across a website that hosts resources for all the dresspheres from Final Fantasy X-2.  Since my post went up, they have added my "tutorial" to their list!  I'm very proud to be a part of this collection and I highly recommend checking it out next time you wanna make a FFX-2 cosplay.

Check out the Gunner page here and browse around the other dressphere resources while you're there.

Enjoy!



CosPlay with me
-Angi

Black Widow: a wig dying extravaganza!

So even though Natasha had black hair when she was introduced in 1964, her red hair has become synonymous with her character and no Black Widow cosplay is complete without it.

Naturally the first thing I did when I decided on the costume was order a red wig off eBay:

I loved the color and the shape and was very excited to have found the perfect wig right off the bat!

Until I received the package in the mail and it looked like this:

Pretty much not at all the same color, huh?  Or really even the same style...

I wanted to make sure to include this part of the journey to emphasize to all you cosplayers out there how important it is to research your purchases on eBay.  Convenient though it may be, descriptions are very rarely accurate.

So I did a little research on dying a synthetic wig and was appalled at how unhelpful all the information out there is.  Most people tend to advocate for the Sharpie method, but that seemed way too complicated and expensive for varied results, whereas the acrylic ink route seemed to have positive results when applied correctly, but there was very little information on how the method fared with an already colored wig and there was little to no reference on what to expect during the process.

Finally, I came across an extremely useful blog by funnypeculiar at To The Wig Shop about her experience dying a turquoise wig blue and was reassured.  And so I embarked on a magnificent cosplay adventure!

**those of you who would rather watch the video can skip to the end or visit it here


Materials
*metal wig stand - NOT STYROFOAM
*FW (or other preferred brand) acrylic artist ink in desired color
*70% isopropyl rubbing alcohol
*spray bottle of any size/material - the smaller the bottle the more you will have to refill
*plastic hair clips - that you don't mind staining
*hairbrush or comb - that you don't mind staining
*rubber or latex gloves
*plastic trash bag or other material to cover workspace
*well-ventilated area - ideally a garage, driveway or similar space

Why a metal wig stand?  Because a styrofoam stand will get stained with the ink and be destroyed when the wet wig sits on it to dry.

Where can you get acrylic ink?  Michael's does not carry acrylic ink, so don't waste your time.  Most local and chain ART stores carry the inks (note Michael's is a CRAFT store, NOT an ART store) - Blick's, Swain's, etc - or you can find them online

Why should you cover your work space and/or work outside?  Because this is what my garage looked like when I finished:

STEP 1: cover anything in your work space you don't want to get stained (counter tops, floors, etc)

STEP 2: set up your wig stand and place your wig on it - use clips to secure the wig to the stand

STEP 3: if working with a long wig, section off the hair into thirds (the right separate from the back separate from the left) so you're able to control what you're hitting with color easier

STEP 4: select with section you'll start with and release the lowest seam of the section, keeping the rest up (I forgot to take a photo of this, but you can see it in effect in my video below)

STEP 5: mix your color:

3/4 cup alcohol
6-7 full squeezes of ink

(recommended ratio: 8 full squeezes of color for every 1 cup of alcohol)

*I mixed two colors together for mine and had a small spray bottle, so my measurements were more like this:

3/4 mass of spray bottle of alcohol
6-7 full squeezes of base color
2+ full squeezes of shade color
(I had to refill about 4+ times)

*I recommend doing a strand test on a small section of hair at the underside of the wig to figure out your ideal color mixture

*WIGS CAN NOT STAND MUCH MORE THAN 2 DYES, so if you need to strand test more than that, I'd recommend pulling out a new strand to test or that section will start to fray

STEP 6: spray color onto thin section you left down

STEP 7: brush or comb (brush is least testy) through that section (starting at bottom of strand and working up to avoid tangles) to ensure every strand is saturated

STEP 8: let down the next seam above the section you just sprayed and re-secure the rest of that section

STEP 9: repeat steps 6-8 until wig is completely covered, repeating step 5 as needed (I left a few random layers the original color to create texture in the wig and loved the results, so that is an option and can work beautifully)

wig with color fully applied

STEP 10: make sure each section is fully brushed through and saturated then let sit for a MINIMUM OF 2 HOURS, MAXIMUM OF 8 - if the color stays on too long it can start to deteriorate the wig, stick, stiffen, or any number of other horrible things you don't want

STEP 11: rinse

*you can use a small dollop of shampoo, but you don't need it

*make sure you really work the wig strands to get all the ink out and the water is running clear

*MAKE SURE YOUR SINK IS CLEAN - you don't want toothpaste getting stuck on your wig and eating away the color you just applied

STEP 12: let wig dry

STEP 13: once the wig is dry, run a brush over it

TADAH!!!!  And you've got yourself a brand new wig!


Before and after comparisons:

 

And finally, for those of you preferring video instructions:





If you have any questions, feel free to direct them here, on YouTube or @AngiViper




CosPlay with me
-Angi